| NYT3X Step & Direction Motion Controller |
 |
| NYT3X Step & Direction |
|
|
-
A stand-alone (stored program) or host controlled, 3-Axis, Step & Direction Motion Controller.
-
300 KHz, Linear Interpolation, TMCL IDE & NYCOMM TOOLS. Pre-sales qualification testing of 3d Party Microstepping Drives & Step & Direction Servo Amplifiers.
-
Key features:
- 3 Axis Motion Controller
- 8 Optically Isolated Digital Inputs.
- The inputs are jumpered. Removing the jumper, removes the isolation circuit, allowing the inputs to be used as 10 bit analog inputs.
- The inputs have LEDs for visual status checking.
- Optically Isolated Right and Left Limit Switch inputs. One (1) set per axis. The limits have LEDs for visual status checking.
- Input Voltage Range: 12 - 34Vdc
- On-board Regulated 5 Vdc power supply
- 8 200 ma, continuous, Outputs. Again, each output has an LED for visual status checking.
- Screw terminals and/or C-Grid connectors
- Jumper selectable RS232 or RS485 and CAN
- Communication-to-resistor and shield-to-ground features. Designed with integrated communication terminations, daisy chaining and grounding features.
- 2 - 3 Axis Analog Joystick Interface
- DIN Rail Mounted (shown below) or PCB with Stand-offs.
|
 |
| NYT3X-SD Din Rail Mounted (Standard) |
|
|
|
