| NYT3X Step & Direction Machine Control |
Made in the USA
Sales & Application Support: 503 617-0252
|
 |
| NYT3X Step & Direction |
|
|
-
A stand-alone (stored program) or host controlled, 3-Axis, Step & Direction Motion Controller.
-
300 KHz, Linear Interpolation, TMCL IDE & NYCOMM TOOLS. Pre-sales qualification testing of 3d Party Microstepping Drives & Step & Direction Servo Amplifiers.
-
Key features:
-
3 Axis Motion Controller
-
8 Optically Isolated Digital Inputs.
-
The inputs are jumpered. Removing the jumper, removes the isolation circuit, allowing the inputs to be used as 10 bit analog inputs.
-
The inputs have LEDs for visual status checking.
-
Optically Isolated Right and Left Limit Switch inputs. One (1) set per axis. The limits have LEDs for visual status checking.
-
Input Voltage Range: 12 - 28Vdc
-
On-board Regulated 5 Vdc power supply
-
8 ea 200 ma, continuous, Outputs. Each output has an LED for visual status checking.
-
Screw terminals and/or C-Grid connectors
-
Jumper selectable RS232 or RS485 and CAN
-
Termination resistors.
-
2 - 3 Axis Analog Joystick Interface
-
DIN Rail Mounted (shown below) or PCB with Stand-offs.
|
 |
| NYT3X-SD Din Rail Mounted (Standard) |
|
|
 |
| Control up to 3 HaydonKerk PDE Actuators |
|
|
|
